9-9
User Guide for Cisco Unified Personal Communicator for Macintosh, Release 1.1
OL-10984-01
Chapter9 About Your Preferences and Status
Specifying Preferences
Specifying Your Reachability Status
Your reachability status automatically changes based on when you use your
computer or your phone, unless you choose a reachability status to display. If you
set your status, this setting reverts to Automatic each time you log in to
Cisco Unified Personal Communicator.
Reachability statuses are described in the “Determining Callee Reachability”
section on page 2-4.
Procedure
Step1 Perform the following:
Near the top of the console, click the selection that is currently showing.
Step2 Choose an option:
Option Details
Automatically change status for
activity
If there is no check mark beside the
option, select the option.
Cisco Unified Personal Communicator
will display your status according to
the descriptions in the table in the
“Determining Callee Reachability”
section on page 2-4.
To specify the conditions under which
your status shows as Idle or Away, see
the “Specifying When Your
Reachability Status Changes
Automatically” section on page9-10.
Avai lab le The option you choose shows until you
change it or quit Cisco Unified
Personal Communicator.
Busy
Away