Chapter1 Introducing Cisco Unified Personal Communicator
Setting Up CiscoUnified Personal Communicator
1-4
User Guide for Cisco Unified Personal Communicator for Macintosh, Release 1.1
OL-10984-01
Step2 Obtain the disk image (CiscoUnifiedPersonalCommunicator-K9.dmg) from your
system administrator.
Step3 If the disk image does not mount automatically, double-click it.
Step4 Accept the license agreement.
Step5 Follow the instructions.
Step6 (Optional) Move the disk image to the trash.
Step7 Continue with the instructions in the “Before You Use
Cisco UnifiedPersonal Communicator” section on page 1-4.
Before You Use Cisco Unified Personal Communicator
Before you launch Cisco UnifiedPersonal Communicator, prepare your
equipment:
Setting Up Your Headset, page1-4
Setting Up Your Camera, page1-4

Setting Up Your Headset

If you will use a headset with your soft phone, follow the instructions that came
with the headset.
After you plug in your headset, you may need to wait a few moments before you
do anything else.

Setting Up Your Camera

The software for supported Apple cameras is included with the Macintosh
operating system software.
Procedure
Step1 Set up your camera following the instructions that came with it.