Cisco Systems UBR7100E manual Shipping Container Contents

Chapter 2 Preparing for Installation

Shipping Container Contents

Shipping Container Contents

Ensure that the correct Cisco uBR7100 series router is in the shipping container. The shipping container includes the following items:

•Cisco uBR7100 series router with appropriate port adapter card installed. If the port adapter is not installed, it should be installed, using the instructions that accompany the card, before the router is installed.

•A rack-mount and cable-management kit that includes the following items:

–Two rack-mount brackets for 19-inch rack installations

–One cable-management bracket

–Sixteen 3.5 x 8-mm Phillips flathead screws for securing the rack-mount brackets to the chassis

–Two 3.5 x 7-mm slotted hexhead screws for securing the cable-management bracket to the chassis

Note Four 10-32 x 3/8-inch slotted binderhead screws are required to secure the chassis to the rack rails; the binderhead screws are not included in the rack-mount and cable-management kit.

•Four Rubber feet for mounting the router on a tabletop

•Nylon cable tie

•Cable tie holder

•Ground lug kit that includes two M3.5 x 7-mm screws

•Rollover RJ-45 to RJ-45 cable for connecting the console or auxiliary port

•Female RJ-45-to-DB-9 adapter for connecting a PC running terminal emulation software to the console port

•Male RJ-45-to-DB-25 adapter for connecting a modem to the auxiliary port for remote access

•Documentation roadmap

•Regulatory Compliance and Safety Information for the Cisco uBR7100 and Cisco uBR7100E Series Universal Broadband Router

Note Depending on the exact model and bundle ordered, other materials, such as an evaluation copy of Cisco Network Registrar (CNR), might also be included with the Cisco uBR7100 series router.

Keep the shipping container in case you must return the router to the factory.

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

2-2 OL-5916-01