Cisco Systems UBR7100E manual Mounting the Chassis on a Tabletop

Chapter 3 Installing Cisco uBR7100 Series Universal Broadband Routers

Physical Placement

Mounting the Chassis on a Tabletop

The Cisco uBR7100 series router can be mounted on a flat, hard, and stable surface, such as a tabletop. Ensure that the mounting area has a sufficient footprint to accommodate the router, as given in the “Site Requirement Guidelines” section on page 2-6.

Equipment not located correctly on a tabletop is susceptible to malfunctions and shutdowns, and can make maintenance difficult. Make sure that the equipment is not placed too close together, that the equipment has adequate ventilation, and that all panels are easily accessible.

Before placing the router on the tabletop, attach the rubber feet as shown in Figure 3-1. Rubber feet are included in the accessory kit that shipped with your router.

Figure 3-1 Attaching the Rubber Feet

37632

Cisco uBR7100 series router

chassis bottom

Warning Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and equipment damage. Statement 48

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

3-2 OL-5916-01