Cisco Systems UBR7100E Fiber-Optic Cables and Connectors, Figure C-5 Duplex SC Cable Connector

Appendix C Cable Specifications

Fiber-Optic Cables and Connectors

Fiber-Optic Cables and Connectors

Warning Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not view directly with optical instruments. Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. Statement 1056

Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051

Use a single-mode or multimode fiber-optic interface cable to connect your Cisco uBR7100 series router to another router or switch. In general, multimode cables are gray or orange, and single-mode cables are yellow. For SONET or synchronous digital hierarchy (SDH) single-mode and multimode fiber-optic connections, use one duplex SC-type connector (Figure C-5) or two simplex SC-type connectors. (See Figure C-6.)

Figure C-5 Duplex SC Cable Connector

H2214

Figure C-6 Simplex SC Cable Connector

H2399

Figure C-7 Attaching Simplex or Duplex Fiber-Optic Cables

SONET/SDH with simplex or duplex SC connectors

RX TX

Simplex

Duplex

To network

25168

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

C-6 OL-5916-01