Cisco Systems UBR7100E manual Router Model, Upstream Modulation If Output

Appendix A System Specifications

Physical Specifications

Table A-1 Physical Specifications and Power Requirements (continued)

Description	Specification
WAN interface options	For a list of supported port adapters, refer to the “Port Adapters” section
	on page 1-7and Table 1-1 on page 1-8.
	Note Additional port adapters may be added in future Cisco IOS
	software releases. See the Cisco IOS software release notes for
	your software release for the most recent list of supported port
	adapters.
Recommended minimum	Cisco IOS Release 12.1(5)EC or later release for DOCSIS operations
software requirements	Cisco IOS Release 12.1(7)EC or later release for EuroDOCSIS
	operations
Compliance marking	CE, CSA, TUV, FCC, ICES, VCCI, AS/NZS, BSMI
Safety	UL 1950, CSA 22.2 No. 950, EN60950, ACA TS001, AS/NZS 3260,
	IEC 60950
EMC Emissions5	CFR 47 part 15:1998 Class B; EN55022:1994 [incl AMD1+AMD2]
	Class B; AS/NZS 3548:1995; CISP22:1997 Class B; VCCI:1997
	ClassB; ICES-003:1994; CNS13438:1997 Class B
EMC Immunity	EN61000-3-2:1995; EN61000-3-2:19956

1.Btu = British thermal units.

2.A = amperes.

3.W = watts.

4.cfm = cubic feet per minute.

5.EMC = electromagnetic compatibility.

6.Refer to Regulatory Compliance and Safety Information for the Cisco uBR7100 and Cisco uBR7100E Series Universal Broadband Routers for more information.

Table A-2 Cisco uBR7100 Series Cable Interface Specifications

Router Model	Downstream Modulation	Upstream Modulation	IF Output1
uBR7111	64 QAM	QPSK	+35 to +43 dBmV
uBR7114	64 QAM	QPSK	+35 to +43 dBmV
uBR7111E	64 QAM	QPSK	+33 to +38 dBmV
uBR7114E	64 QAM	QPSK	+33 to +38 dBmV

1. This table shows the output from the DS0 downstream port, which does not use the integrated upconverter.

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

A-2 OL-5916-01