Chapter 6 Maintenance
Upgrading the SDRAM Memory Modules
Figure 6-6 Removing the Cover
2
1
Cisco | uBR7100 |
|
116848
SERIES
2
1
Cover screws
2
Tabs
Removing the SDRAM DIMM
To remove the existing DIMM, use the following procedure:
Step 1 Make sure that you are properly grounded.
Step 2 Locate the DIMM and position the chassis so that you are facing the DIMM module you want to remove.
Step 3 Open the DIMM latches on the DIMM to release the DIMM from the socket. (See Figure
Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide
|
| ||
|
|