Cisco Systems WSC4500XF32SFP Related Documentation, Chapter, Title, Description, Removing and

Preface

Related Documentation

Chapter	Title	Description
Chapter 4	Removing and	Describes how to remove and replace field-replaceable units
	Replacing FRUs	(FRUs).
Chapter 5	Troubleshooting	Provides troubleshooting guidelines for the initial hardware
		installation and suggests steps to help isolate and resolve
		problems.
Appendix A	Specifications	Lists the cable and technical specifications of the
		Catalyst 4500 series switches.
Appendix B	Repacking a Switch	Provides instructions for repacking your Catalyst 4500
		series switch in the event that you have to return it to the
		factory.

Related Documentation

Refer to the following documents for additional Catalyst 4500 series information:

•Catalyst 4500 Series Module Installation Guide at http://www.cisco.com/en/US/products/hw/switches/ps4324/products_modul e_installation_guide_book09186a008009c17d.html

for information about individual switching modules and supervisors.

•Regulatory Compliance and Safety Information for the Catalyst 4500 Series Switches at http://www.cisco.com/en/US/products/hw/switches/ps4324/products_regula tory_approvals_and_compliance09186a00800d7676.html

•The release note appropriate to your software version. Release notes are at: http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_release_no tes_list.html

•The software configuration guide appropriate to your software version. Software configuration guides are at: http://www.cisco.com/en/US/products/hw/switches/ps4324/products_install ation_and_configuration_guides_list.html

•The command reference appropriate to your software version. Command references are at: http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_command _reference_list.html

Catalyst 4500 Series Switches Installation Guide

x 78-14409-08