Cisco Systems WSC4500X24XIPB manual 4 L Brackets on the Front Edge of the Catalyst 4510R Switch

Chapter 3 Installing the Switch in a Rack

Rack-Mounting the Switch

Figure 3-4 L Brackets on the Front Edge of the Catalyst 4510R Switch

		UPLINK
			UPLINK
	STATUS
		UPLINK
			UPLINK
	STATUS
WS-	X4412-2GB-TX
		STATUS
		1	2
			3	4
WS-	X4412-2GB-TX			5	6
					7	8
						9	10
							11	12
		STATUS
		1	2
			3	4
WS-X4412-				5	6
		2GB-TX
					7	8
						9	10
							11	12
		STATUS
		1	2
WS-			3	4
	X4448-GB-RJ45			5
					6
					7	8
						9	10
							11	12
	STATUS
WS-	X4448-GB-RJ45
	STATUS
WS-	X4448-GB-RJ45
	STATUS
WS-	X4448-GB-RJ45
	STATUS

1

2

CONSOLE	10/100
	BASE-TX

CONSOLE	10/100
	BASE-TX

17

17

17

94938

c.Attach the cable guide, if needed, using the M3 screws provided in the cable management kit. The cable guide attaches to the L bracket. Attach the cable guide to the right side of the switch to prevent the cables from obscuring module LEDs.

See Figure 3-5for the Catalyst 4503 switch, Figure 3-6for the Catalyst 4506 switch, Figure 3-7for the Catalyst 4507R switch, or Figure 3-8for the Catalyst 4510R switch.

	Catalyst 4500 Series Switches Installation Guide
78-14409-08		3-9