Cisco Systems WSC4500X24XIPB, WSC4500XF32SFP, WSC4500XF16SFP manual 4-25, htm#wp21932

Chapter 4 Removing and Replacing FRUs

Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch

Step 3 Remove all supervisor engines and switching modules from the chassis, and find the backplane modules you need to replace.

Note Keep a record of switching moduleand their slots, so that you can put them back correctly.

Note Generic switching module replacement procedures are documented at: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/hw_doc/gmdcf_nt

.htm#wp21932

Figure 4-21shows the front view of the backplane with supervisors and switching modules removed.

	Catalyst 4500 Series Switches Installation Guide
78-14409-08		4-25