Cisco Systems WSC4500XF16SFP manual 4-27, 22 Finding the Seating Levers, 23 Releasing the Module

Chapter 4 Removing and Replacing FRUs

Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch

Step 4 If you are removing a clock module, remove the two screws that attach the module to the backplane.

Step 5 Find the seating levers on both sides of the connector for the module you wish to replace. (See Figure 4-22.)

Figure 4-22 Finding the Seating Levers

130658

Step 6 To release the module from its connector, pull the levers outward with your fingernails. The module will pop out slightly. (See Figure 4-23.)

Figure 4-23 Releasing the Module

130659

	Catalyst 4500 Series Switches Installation Guide
78-14409-08		4-27