Cisco Systems WSC4500X24XIPB, WSC4500XF32SFP, WSC4500XF16SFP manual Troubleshooting, C H A P T E R

C H A P T E R 5

Troubleshooting

If your system has problems during start up or operation, use the information in this chapter to help isolate the cause. Problems with the initial startup are often caused by a switching module that has become dislodged from the backplane or a power cord that is disconnected from the power supply.

Although temperature conditions above the maximum acceptable level rarely occur at initial startup, some environmental monitoring functions are included in this chapter because they also monitor power supply output voltages.

Information about troubleshooting software features and configuration problems is not discussed in this chapter.

The information is presented in these sections:

•System Boot Verification, page 5-2

•Problem Solving to the System Component Level, page 5-3

•Using LEDs to Identify Startup Problems, page 5-4

•Troubleshooting the Power Supply, page 5-6

•Troubleshooting the Fan Assembly, page 5-8

•Troubleshooting Backplane Modules, page 5-9

•Troubleshooting Switching Modules, page 5-10

•Troubleshooting Supervisor Engines, page 5-13

•Contacting the Cisco Technical Assistance Center, page 5-16

	Catalyst 4500 Series Switches Installation Guide
78-14409-08		5-1