Cisco Systems WSC4500X24XIPB, WSC4500XF32SFP, WSC4500XF16SFP manual Supervisor Engines, Vlans

Chapter 1 Product Overview

Supervisor Engines

Supervisor Engines

The following supervisor engines are available for the Catalyst 4500 series switches:

•Supervisor Engine II (WS-X4013) (Figure 1-5)

•Supervisor Engine II-Plus (WS-X4013+) (Figure 1-6)

•Supervisor Engine II-Plus TS (WS-X4013+TS) (Figure 1-7)

•Supervisor Engine II-Plus 10GE (WS-X4013+10GE) (Figure 1-8)

•Supervisor Engine III (WS-X4014) (Figure 1-9)

•Supervisor Engine IV (WS-X4515) (Figure 1-10)

•Supervisor Engine V (WS-X4516) (Figure 1-11)

•Supervisor Engine V-10GE (WS-X4516-10GE) (Figure 1-12)

The Catalyst 4500 series supervisor engines have the following features:

Table 1-5	Supervisor Engine Features
Feature		Description
Data path and control		Available on all network interfaces
Management functions		Interface monitoring
		Environmental status
		SNMP and console/Telnet interface
MAC addresses supported		32,768 per system (Cisco IOS only)
VLANS		Up to 4,096 VLANs with IEEE 802.1Q VLAN tagging on all ports and
		VLAN Trunking Protocol (VTP)
Port aggregation		PAgP1 for 100-Mbps and 1000-Mbps EtherChannel
SNMP		Full implementation, including entity-MIB, all relevant standard MIBs,
		and all relevant Cisco MIBs
RMON		The first four groups (Ethernet statistics, Alarms, Events, and History)
		are on a per-port basis without an optional RMON processing module
SPAN2		Supported, which allows you to redirect traffic from any port or VLAN
		to a SPAN destination port
Performance management		Information provided
	Catalyst 4500 Series Switches Installation Guide
1-18		78-14409-08