Cisco Systems WSC4500XF16SFP, WSC4500X24XIPB, WSC4500XF32SFP manual Quantity, Part Description

Chapter 3 Installing the Switch in a Rack

Rack-Mounting the Switch

Table 3-1	Rack-Mount Kit Checklist
Quantity	Part Description
2	L brackets
6	M4 Phillips pan-head screws
6	12-24 x 3/4-inch Phillips binder-head screws

Note Some equipment racks provide a power strip along the length of one of the rear posts. If your rack has this feature, consider the position of the strip when planning fastener points. Before installing the L brackets on the chassis, determine whether to install the chassis from the front or the rear of the rack.

Step 2 Install the L brackets, which connect the chassis to the rack, as follows:

a.Remove the screws from the front of the switch side-cover panels.

b.Attach the left and right L brackets using the six M4 Phillips pan-head screws (three screws per side) provided in the rack-mount kit.

See Figure 3-1for the Catalyst 4503 switch, Figure 3-2for the Catalyst 4506 switch, or Figure 3-3for the Catalyst 4507R switch, or Figure 3-4for the Catalyst 4510R switch.

	Catalyst 4500 Series Switches Installation Guide
78-14409-08		3-5