Cisco Systems WSC4500XF32SFP, WSC4500X24XIPB Required Tools, Removing an AC-Input Power Supply

Chapter 4 Removing and Replacing FRUs

Removing and Replacing the Power Supply

Required Tools

You will need a flathead or Phillips screwdriver to perform these procedures.

Removing an AC-Input Power Supply

Follow these steps to remove the AC-input power supply:

Step 1 Press the power switch on the AC-input power supply down to the off (O) position (see Figure 4-5).

Figure 4-5 Powering Off the Power Switch

Power switch

79138

Note There are two on/off switches on a 4200 W AC power supply, one for each input.

Step 2 Loosen the side-clamp screw on the right side of the power cord plug (see Figure 4-6).

	Catalyst 4500 Series Switches Installation Guide
78-14409-08		4-5