Manuals / Citation / Home Audio / Stereo Receiver

Citation Stereo Receiver owner manual Rear Panel Connections

Models: Stereo Receiver

1 72

Download 72 pages 44.03 Kb

Page 17

¡S-Video Main Output: Connect this jack to the main video display device that will be used to view the output of the source selected by the 5.0.

¡S-Video Main Output: Connect this jack to the main video display device that will be used to view the output of the source selected by the 5.0.

áS-Video Inputs: Connect the output of S-video sources to these input jacks. Once the inputs have been connected, they may be assigned to any of the 5.0’s program proﬁles using the Programs Setup Menu (see page 37).

Important Note on S-Video Sources: The 5.0 does not convert standard, composite video input signals into S-video outputs. In order for a video signal to appear at any of the S-video outputs, the input program must contain S-video source.

a Record A Composite Video Output: Connect this jack to the standard video “REC IN” jack of a VCR to record the input selected by the 5.0.

bAuxiliary Composite Video Output: This jack provides an additional composite video output connection for the source selected for the main viewing room.

cComposite Video Remote Zone Output: This jack provides a standard, composite video signal for the remote zone location. This input is selected by using the Remote Zone Input buttons R on the remote control.

dMain Composite Video Output: Connect this jack to the composite video input of the TV set, video monitor, projection television or other video display device that will be used in the main viewing location.

eComposite Video Inputs: Connect the output of composite video sources to these input jacks. Once the inputs have been connected, they may be assigned to any of the 5.0’s program proﬁles using the Programs Setup Menu (see page 37).

fOptical Digital Audio Inputs: Connect the optical (TosLink) digital audio output of audio sources to these jacks. Once the inputs have been connected, they may be assigned to any of the 5.0’s program proﬁles using the Programs Setup Menu (see page 37).

gCoax Digital Audio Inputs: Connect the coax digital audio output of audio sources to these jacks. Once the inputs have been connected, they may be assigned to any of the 5.0’s program proﬁles using the Programs Setup Menu (see page 37).

Rear Panel Connections

17

Image 17

Citation Stereo Receiver owner manual Rear Panel Connections

Contents

5.0A/V Controller Owner’s Manual Staple or clip your original bill of sale here.Û Table of Contents Citation Table of Contents continuedIntroduction IntroductionSafety Information Important Safety Information•Avoid moist or humid locations Safety InformationTypographic Conventions Safety InformationUnpacking Quick-StartInstructions Quick-StartInstructionsQuick-StartInstructions Quick-StartConnection and SetupAnalog Quick-StartInstructionsListen Programs listing Quick-StartInstructions3 4 5 Front Panel Controls and IndicatorsFront Panel Controls & Indicators 7Mute Button: Press this button to temporarily reduce or silence the audio output. Press the button again, or change the volume level to return to normal operation. Note that when the Mute function is activated, the level at the Record Outputs £ and Remote Zone ª will remain uninterrupted. When Mute is engaged, a reminder message will appear in the on-screendisplay see ﬁgures OSD-20and OSD-21on page 47 and the word Mute will replace the volume level indication in the Information Display !. The actual level for the system when the Mute function is engaged may be set through the System Options Menu see page Front Panel Controls & IndicatorsRear Panel Connections Rear Panel ConnectionsRear Panel Connections ¢Front Channel Audio Outputs: Connect these jacks to the inputs of the audio power ampliﬁer feeding the front left and right speakers¡S-VideoMain Output: Connect this jack to the main video display device that will be used to view the output of the source selected by the Rear Panel Connections¶ • º Œ Remote Control OperationRemote Control Operation Lower Portion of Remote Remote Control OperationMain Portion of Remote Cancel: This button has two functions. Its main use is to exit from the menus and return either to normal operation or to the previous menu when conﬁguring the 5.0 or adjusting system parame- ters. Within some menus, the Cancel button will have speciﬁc “exit” functions that are shown on screen at the appropriate time. Pressing this button when the unit is in normal operating modes and no other menu is present will reset all user parameters Remote Control OperationQDigital Input Program Buttons: Press any of these buttons to select any of the six digital input programs. Note that the numbers on the buttons DO NOT refer to the equipment connected to any of the individual analog input jacks on the rear of the 5.0. These numbers call up the complete input proﬁle that is established using the Programs Setup Menu to combine any of the digital sources with any video input. See pages 37–40for more information on conﬁguring the input programs Remote Control OperationInput Connections System InstallationSystem Installation Video Inputs System InstallationAudio Inputs System Installation Output ConnectionsSystem and Accessory Inputs Audio OutputsCitation 5.0 A/V Controller System InstallationVideo Outputs System InstallationRecord Outputs Remote Zone OutputsAdditional Amplifiers System InstallationSystem Accessory Connections System Installation System Conﬁguration Speaker Selection and PlacementSystem Conﬁguration System Conﬁguration Figure 6 Speaker Placement, Side ViewFigure OSD-1 Initial Turn-OnSystem Conﬁguration RESET Speaker SetupSystem Conﬁguration CitationSystem Conﬁguration is installedSystem Conﬁguration •Select NONE when no subwoofers are installed<Ð Exit Menus <Ð appears System ConﬁgurationFigure OSD-5 Figure OSD-6Figure OSD-7 System ConﬁgurationFigure OSD-8 Program SetupSystem Conﬁguration System Conﬁguration The second line, just below the line indicating how to return to the “Main Menu,” contains the program number. Remember that this number only deﬁnes the sources and conditions that you attach to it in the following steps. It DOES NOT refer to any speciﬁc input connection on the 5.0’s rear panelonce so that Input System ConﬁgurationSystem Conﬁguration System Optionsjack â on the rear panel, or both System ConﬁgurationFigure OSD-11 System ConﬁgurationSystem Editing Watch and Listen ListsConﬁguration Operating the Citation Operating the CitationTurning On and Off POWER OFF STANDBY Source SelectionOperating the Citation Prog 7 : DVD Pro Logic* Vol=49Operating the Setting the Volume LevelCitation Operating the Citation Setting the Balance and Level TrimsMASTER VOLUME = Operating the Citation Output Level Adjustment TrimsFigure OSD-22 Figure OSD-23Figure OSD-24 Secondary Remote ControlsOperating the Citation Figure OSD-25 Surround ModesOperating the Citation and music Movie Modes vs. Music ModesOperating the Citation Operating the Citation Surround Mode DeﬁnitionsSelecting Surround Modes Movie ModesMusic Modes Operating the CitationViewing System Status Viewing the Digital Mode StatusOperating the Citation Figure OSD-26Customizing Surround Modes Advanced FeaturesAdvanced Features The next line down is Mode Type. Press the Û Menu Control button one more time to reach this line, but do note that if you have chosen either Dolby or 6-Axis on the line above Mode Button, you cannot move below the Mode Button line. This is to preserve their factory settings when they are selected by their dedicated buttons Advanced FeaturesFigure OSD-30 Advanced FeaturesCustomizing Digital Sources Setting Up the Remote Zone Remote ZoneAdvanced Features Advanced Features System ResetFigure OSD-32 Advanced FeaturesFigure OSD-33 Figure OSD-34Figure OSD-37 Advanced FeaturesFigure OSD-38 Figure OSD-39Troubleshooting Guide Troubleshooting GuideAppendix A Appendix A Factory PresetsPage Appendix A ANALOG INPUT MODE MAP Default SettingsDIGITAL INPUT MODE MAP Default Settings Appendix B Appendix B User WorksheetsAuto Service Information Service InformationSpeciﬁcations SpeciﬁcationsFigure Index Figure IndexFigure FigureLimited U.S. and Canadian Warranty Limited U.S. and Canadian WarrantyMadrigal Audio Laboratories, Inc P.O. Box CitationMiddletown, CT Manufactured in USA Part #