Citation Stereo Receiver owner manual System Accessory Connections

System Accessory Connections

The Citation 5.0 is equipped with two separate control triggers that may be used to activate a wide variety of optional, external devices such as power amplifiers, projection screens, power blinds and lighting controls. As the connection and programming of these triggers may be complex, it is strongly suggested that they be installed and configured by your Citation dealer. A connection to the triggers involves voltages, which, if improperly connected, may cause damage not covered by product warranties.

When the triggers are used to power compatible audio power amplifiers from Citation or other manufacturers, connect the Trigger 1 Output Ú to the Trigger Input on the amplifier. The factory defaults for the 5.0 will automatically send a “Power ON” signal to these amplifiers from both Trigger 1 and Trigger 2 when the 5.0 is turned on, and it will return them to a Standby mode when the 5.0 is turned off. To use the triggers for any other function, the Power option for trigger pro- gramming must be turned off in the System Options sub-menu titled Program Triggers. Connections for Citation power amplifiers are shown in the accompanying diagram.

IN1

IN 2

IN 3

MAIN

AUX

IN 1

MAIN

AUX

DIGITAL AUDIO INPUTS

CAUTION

5.0 AV Controller

7

8

9

10

11

12

OUT

OUT

RISK OF ELECTRIC SHOCK

DO NOT OPEN

115V ~ 60Hz

AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

Manufactured in the USA

75 WATTS

IN 4

IN 5

IN 6

RMT ZONE

REC A

IN 2

RMT ZONE

REC A

WARNING: TO REDUCE THE RISK OF FIRE

Manufactured under license from Dolby Laboratories Licensing Corporation. "Dolby", "AC-3",

OR ELECTRIC SHOCK DO NOT EXPOSE THIS

"Pro Logic" and the Double-D symbol are trademarks of Dolby Laboratories Licensing

REMOTE

COMPOSITE VIDEO

STEREO

S – VIDEO

EQUIPMENT TO RAIN OR MOISTURE. DO NOT

Corporation. Copyright 1992 Dolby Laboratories, Inc. All rights reserved.

1

2

3

4

5

6

ZONE

REC A

FRONT

CENTER

SIDE

BACK

SUB

PARTS INSIDE. REFER SERVICING TO QUALIFIED

Additionally licensed under U.S. patent numbers 5,172,415; 5,263,087; 5,307,415; 5,280,528;

L

L

SERVICE PERSONNEL.

5,339,363; 5,295,189; 4,932,059; 5,428,687: 5,504,819 and patents pending.

+ VDC

GND

®

1 2

3 4

R

R

IR IN

TRIG 1 TRIG 2

NRTL /C

MONO SUB

LR110480

ANALOG AUDIO INPUTS

AUDIO OUTPUTS

CSA E65

TRIGGERS

CITATION BUS

SERIAL NUMBER

	NORMAL	MANUAL				NORMAL
	MODE	TURN ON				MODE
		OFF
			DC	DC
		ON	IN	OUT
CH 1 INPUT	BRIDGED	REMOTE	REMOTE		CH 3 INPUT	BRIDGED	CH 4 INPUT
	MODE	CH 2 INPUT TURN ON				MODE
(BRIDGED INPUT)		(NOT USED IN			(BRIDGED INPUT)		(NOT USED IN
		BRIDGED MODE)					BRIDGED MODE)

+		–		+		–
+	BRIDGED	+		+	BRIDGED	+
–	BRIDGED	–	120V ~ 50/60Hz	–	BRIDGED	–
			1200 WATTS

CH 1 OUTPUT CH 2 OUTPUT CH 3 OUTPUT CH 4 OUTPUT

	NORMAL	MANUAL				NORMAL
	MODE	TURN ON				MODE
		OFF
			DC	DC
		ON	IN	OUT
CH 1 INPUT	BRIDGED	REMOTE	REMOTE		CH 3 INPUT	BRIDGED	CH 4 INPUT
	MODE	CH 2 INPUT TURN ON				MODE
(BRIDGED INPUT)		(NOT USED IN			(BRIDGED INPUT)		(NOT USED IN
		BRIDGED MODE)					BRIDGED MODE)

+		–		+		–
+	BRIDGED	+		+	BRIDGED	+
–	BRIDGED	–	120V ~ 50/60Hz	–	BRIDGED	–
			1200 WATTS

CH 1 OUTPUT CH 2 OUTPUT CH 3 OUTPUT CH 4 OUTPUT

Additional Amplifiers

Figure 2 Citation Power Amplifiers may be controlled by connecting TRIG 1 trigger to amplifier remote jacks, as shown.

System Installation

27