Citation Stereo Receiver owner manual Rear Panel Connections

Rear Panel Connections

¢Front Channel Audio Outputs: Connect these jacks to the inputs of the audio power amplifier feeding the front left and right speakers.

°Center Channel Audio Output: Connect this jack to the input of the audio power amplifier feeding the center channel speaker.

¤Mono Subwoofer Output: Connect this jack to the line-level mono input of a powered subwoofer, or the input of an audio amplifier driving a single passive subwoofer.

¦Side Channel Outputs: If Citation or other Dual Drive speakers are used, connect these jacks to the amplifier driving the side channel speaker inputs. If separate side channel speakers are mounted on the left and right walls of the room, connect these jacks to the amplifier providing power to those speakers.

¥Back Channel Outputs: If Citation or other Dual Drive speakers are used, connect these jacks

to the amplifier driving the back channel speaker inputs. If separate speakers are mounted on the rear wall of the listening room, connect the jacks to the amplifier providing power to those speakers.

»Stereo Subwoofer Outputs: When two subwoofers are installed, connect the outputs of these jacks to the input of the powered subwoofers or to the input of the audio power amplifier driving passive subwoofers.

âIR In: An external infrared sensor may be connected to this jack for use in sending remote com- mands to the 5.0 when the front panel IR Sensor @ is blocked, or when a remote sensor is used to control the input and volume from a remote zone location. Selection of the control path for a sensor connected to this jack is controlled via the IR Mode setting on the System Options Menu (see page 40).

ÚTrigger 1 Output: This jack may be used to supply a trigger control voltage for Citation audio power amplifiers or other compatible devices such as projection screens or automatic blinds designed to accept low-voltage on/off control signals. Programming the triggers with regard to the commands they respond to (e.g., Power, Mute or Display Dim) is controlled through the Program Triggers line on the System Options Menu (see pages 41– 42). Setup for the action of the trigger when a specific input is used is programmed through the Programs Setup Menu (see page 37).

Trigger 2 Output: The function of this trigger is identical to Trigger 1, except that it is typically used to control external devices such as screens, blinds or lighting controls. Trigger 1 is typically used for control of audio power amplifiers. Of course, the decision of the devices controlled is entirely user-selectable.

ÜCitation Bus Control Port: This plug is provided to permit operation of the Citation 5.0 by computers or optional wired remote control or home automation systems. The use of this control port requires additional, optional software and it is strongly recommended that a Citation dealer be consulted before any connections are made to this port.

ÝPower Cord: Connect this plug to an unswitched AC power outlet.

ÞS-Video Record Output: Connect this jack to the S-video input of an S-video device to record the selected input source when S-video is present.

ßS-Video Auxiliary Output: This jack provides an additional S-video output connection for the input source selected for the main viewing room.

àS-Video Remote Zone Output: This jack provides an S-video signal for the remote zone location when an S-video source is selected using the Remote Zone Indicator buttons R on the remote control.

16