DGS-3024 Gigabit Ethernet Switch Manual

 

Figure 8- 4. Current SSH Configuration Settings window

To configure the SSH server on the Switch, modify the following parameters and click Apply:

 

 

 

Parameter

Description

 

 

 

SSH Server Status

Use the pull-down menu to enable or disable SSH on the Switch. The default is

 

 

Disabled.

 

 

 

 

Max Session (1-8)

Enter a value between 1 and 8 to set the number of users that may simultaneously

 

 

access the Switch. The default setting is 8.

 

 

 

 

Time Out (120-600)

Allows the user to set the connection timeout. The user may set a time between 120 and

 

 

600 seconds. The default setting is 120 seconds.

 

 

 

 

Auth. Fail (2-20)

Allows the Administrator to set the maximum number of attempts that a user may try to

 

 

log on to the SSH Server utilizing the SSH authentication. After the maximum number of

 

 

attempts has been exceeded, the Switch will be disconnected and the user must

 

 

reconnect to the Switch to attempt another login. The number of maximum attempts

 

 

may be set between 2 and 20. The default setting is 2.

 

 

 

 

Session Rekeying

This field is used to set the time period that the Switch will change the security shell

 

 

encryptions by using the pull-down menu. The available options are Never, 10 min, 30

 

 

min, and 60 min. The default setting is Never.

 

 

 

 

Port (1-65535)

The TCP port number currently being utilized by the Switch to connect to the SSH

 

 

server. The "well-known" TCP port for SSH management is 22.

 

 

 

 

90

Page 104
Image 104
D-Link DSL-G604T manual Parameter Description SSH Server Status, Max Session, Time Out, Auth. Fail, Session Rekeying