|
|
| IP router. The default is Disabled. |
Telnet Status | This indicates if a Telnet connection is currently enabled on the Switch. The default is |
| Enabled. |
Telnet TCP Port | The TCP port number. TCP ports are numbered between 1 and 65535. The "well- |
Number | known" TCP port for the Telnet protocol is 23. |
Web Status | |
| ing Disabled, you will lose the ability to configure the system through the web interface |
| as soon as these settings are applied |
Web TCP Port Number (1-65535)
RMON Status
GVRP
The TCP port number currently being utilized by the Switch to connect to the web interface. The
This indicates if RMON is enabled on the Switch. The default is Disabled.
This indicates if Group VLAN Registration Protocol (GVRP) is enabled on the Switch. GVRP is a protocol that allows members to dynamically join VLANs. The Switch’s GVRP settings can be changed on the GVRP Settings window (Configuration → VLANs → 802.1Q Port Settings). The default is Disabled.
Link Aggregation Algorithm
The algorithm that the Switch uses to balance the load across the ports that make up the port trunk group is defined by this definition. Choose MAC Source, MAC Destination, or MAC Src & Dest, (For further information, see the Link Aggregation section, under the Link Aggregation folder).
Switch 802.1x | The Switch’s 802.1x function may be enabled by port; the default is Disabled. This field |
| must be enabled to view and configure certain windows for 802.1x. More information |
| regarding 802.1x, its functions and implementation can be found later in this section, |
| under the Port Access Entity folder. |
| for 802.1x are initialized based on the port number only and are subject to any |
| authorization parameters configured. |
Syslog State | This allows you to enable or disable the System Log State. The default is Disabled. |
|
|
25
