DGS-3024 Gigabit Ethernet Switch Manual

Port Configuration

Figure 7- 4. Port Configuration window

To configure Switch ports:

1.Choose the port or sequential range of ports using the From and To pull-down menus.

2.Use the remaining pull-down menus to configure the parameters described below:

Parameter Description

State <Enabled>

Toggle the State field to either enable or disable a given port or group of ports.

 

 

Speed/Duplex <Auto>

Toggle the Speed/Duplex field to either select the speed and duplex/half-duplex

 

state of the port. Auto denotes auto-negotiation between 10 and 100 Mbps

 

devices, in full- or half-duplex. The Auto setting allows the port to automatically

 

determine the fastest settings the device the port is connected to can handle, and

26

Page 40
Image 40
D-Link DSL-G604T manual Port Configuration, Parameter Description