DGS-3024 Gigabit Ethernet Switch Manual

Reauthenticate Port(s)

This window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull down menus From and To and clicking Apply. The Reauthenticate Port Table displays the current status of the reauthenticated port(s) once you have clicked Apply.

Click Configuration > Port Access Entity > Reauthenticate Port(s) to open the Reauthenticate Port(s) window:

Figure 7- 59. Reauthenticate Port window

This window displays the following information:

Parameter

Description

 

 

 

 

Port

 

The port number of the reauthenticated port.

 

 

 

 

 

MAC Address

 

Displays the physical address of the Switch where the port resides.

 

 

 

 

 

Auth State

 

The Authenticator State will display one of the following: Initialize, Disconnected,

 

 

 

Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and

 

 

 

N/A.

 

 

 

 

 

BackendState

 

The Backend State will display one of the following: Request, Response, Success, Fail,

 

 

 

Timeout, Idle, Initialize, and N/A.

 

 

 

 

 

OpenDir

 

Operational Controlled Directions are both and in.

 

 

 

 

 

PortStatus

 

The status of the controlled port can be Authorized, Unauthorized, or N/A.

 

 

 

 

 

83

Page 97
Image 97
D-Link DSL-G604T manual Reauthenticate Ports, Parameter Description Port, Auth State, OpenDir