DGS-3024 Gigabit Ethernet Switch Manual

Figure 7- 34. second 802.1Q Static VLANs window (Modify)

The following fields can then be set in either the Add or Modify 802.1Q Static VLANs windows:

Parameter

Description

 

 

 

 

VID (VLAN ID)

 

Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing

 

 

 

VLAN in the Modify window. VLANs can be identified by either the VID or the VLAN

 

 

 

name.

 

 

 

 

 

VLAN Name

 

Allows the entry of a name for the new VLAN in the Add window, or for editing the VLAN

 

 

 

name in the Modify window.

 

 

 

 

 

Advertisement

 

Enabling this function will allow the Switch to send out GVRP packets to outside

 

 

 

sources, notifying that they may join the existing VLAN.

 

 

 

 

 

Port Settings

 

Allows an individual port to be specified as member of a VLAN.

 

 

 

 

 

Tag

 

Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will

 

 

 

designate the port as Tagged.

 

 

 

 

 

None

 

Allows an individual port to be specified as a non-VLAN member.

 

 

 

 

 

Egress

 

Select this to specify the port as a static member of the VLAN. Egress member ports are

 

 

 

ports that will be transmitting traffic for the VLAN. These ports can be either tagged or

 

 

 

untagged.

 

 

 

 

 

Forbidden

 

Select this to specify the port as not being a member of the VLAN and that the port is

 

 

 

forbidden from becoming a member of the VLAN dynamically.

 

 

 

 

 

Click Apply to implement changes made.

8021Q Port Settings

In the Configuration menu, open the VLANs folder and click 8021Q Port Settings.

This GVRP Settings window (shown below), allows you to determine whether the Switch will share its VLAN configuration information with other GARP VLAN Registration Protocol (GVRP) enabled Switches. In addition, Ingress Checking can be used to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port. Results can be seen in the table under the configuration settings, as seen below.

57

Page 71
Image 71
D-Link DSL-G604T manual 8021Q Port Settings