DGS-3024 Gigabit Ethernet Switch Manual
System Log Server
The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the Configuration folder, click System Log Server, to view the window shown below.
Figure 7- 46. System Log Servers window
The parameters configured for adding and editing System Log Server settings are the same. To add a new Syslog Server, click the Add button. To modify a current entry, click the hyperlinked number of the server in the Index field. Both actions will result in the same window to configure. See the table below for a description of the parameters in the following window.
Figure 7- 47. System Log Server – Add window
The following parameters can be set:
Parameter | Description | |
|
|
|
Index | Syslog server settings index. |
|
|
|
|
Server IP | The IP address of the Syslog server. |
|
|
|
|
Severity | This |
|
| options are Warning, Informational, and ALL. |
|
|
|
|
Facility | Some of the operating system daemons and processes have been assigned Facility |
|
| values. Processes and daemons that have not been explicitly assigned a Facility may |
|
| use any of the "local use" facilities or they may use the |
|
| Facilities that have been designated are shown in the following. Bold font denotes the |
|
| facility values that the Switch currently implements. |
|
|
|
|
72
