DGS-3024 Gigabit Ethernet Switch Manual

Figure 11- 7. Save Configuration Confirmation dialog box

Click the OK button to continue.

Once the Switch configuration settings have been saved to NV-RAM, they become the default settings for the Switch. These settings will be used every time the Switch is rebooted.

Reboot Services

Reboot

The following window is used to restart the Switch.

All of the configuration information entered from the last time Save Changes was executed will be lost. Click the Reboot button to restart the Switch.

Figure 11- 8. Restart System window

Reset

The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be retained while resetting all other configuration parameters to their factory defaults.

NOTE: Only the Reset System option will enter the factory default parameters into the Switch's non-volatile RAM, and then restart the Switch. All other options enter the factory defaults into the current configuration, but do not save this configuration. Reset System will return the Switch's configuration to the state it was when it left the factory

140

Page 154
Image 154
D-Link DSL-G604T manual Reboot Services, Reset