D-Link DSL-G604T manual Unicast Forwarding, Multicast Forwarding, Allowed to go port

	DGS-3024 Gigabit Ethernet Switch Manual
	True.
State	This drop-down menu allows you to enable or disable STP for the selected group of
	ports. The default is Enabled.

Click Apply to implement changes made.

Forwarding

Unicast Forwarding

Open the Forwarding folder in the Configuration menu and click on the Unicast Forwarding link. This will open the Setup Static Unicast Forwarding Table window, as shown below:

Figure 7- 26. Setup Static Unicast Forwarding Table window

To add or edit an entry, define the following parameters and then click Add/Modify:

Parameter	Description
VID (VLAN ID)		The VLAN ID number of the VLAN on which the above Unicast MAC address
		resides.
MAC Address		The MAC address to which packets will be statically forwarded. This must be a
		unicast MAC address.
Allowed to go port		Allows the selection of the port number on which the MAC address entered above
		resides.

Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the

corresponding under the Delete heading.

Multicast Forwarding

The following window describes how to set up Multicast Forwarding on the Switch. Open the Forwarding folder and click on the Multicast Forwarding link to see the entry window below:

48