DGS-3024 Gigabit Ethernet Switch Manual

To configure port trunking, click on the Link Aggregation hyperlink in the Configuration folder to bring up the following window:

Figure 7- 7. Port Trunking Group window

To configure port trunk groups, click the Add button to add a new trunk group and use the Port Trunking Configuration window to set up trunk groups. To modify a port trunk group, click the Modify button corresponding to the entry you wish

to alter. To delete a port trunk group, click the corresponding under the Delete heading in the Current Trunking Group Entries table.

Figure 7- 8. Port Trunking Configuration window

The user-changeable parameters are as follows:

Parameter

Description

 

 

 

 

Group ID [1-4]

 

Select an ID number for the group, between 1 and 4.

 

 

 

 

 

State

 

Trunk groups can be toggled between Enabled and Disabled. This is used to turn a

 

 

 

port trunking group on or off. This is useful for diagnostics, to quickly isolate a

 

 

 

bandwidth intensive network device or to have an absolute backup aggregation

 

 

 

group that is not under automatic control.

 

 

 

 

 

Type

 

The type of port trunking supported by the DGS-3024 is Static.

 

 

 

 

 

30

Page 44
Image 44
D-Link DSL-G604T manual Parameter Description Group ID, State, Type