DGS-3024 Gigabit Ethernet Switch Manual
Figure 10- 5. Rx Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets)
The following fields may be set or viewed:
Parameter | Description | ||
|
|
|
|
Time Interval |
| Select the desired setting between 1s and 60s, where "s" stands for seconds. The |
|
|
| default value is one second. |
|
|
|
|
|
Record Number |
| Select the number of times the Switch will be polled between 20 and 200. The default |
|
|
| value is 20. |
|
|
|
|
|
Unicast |
| Counts the total number of good packets that were received by a unicast address. |
|
|
|
|
|
Multicast |
| Counts the total number of good packets that were received by a multicast address. |
|
|
|
|
|
Broadcast |
| Counts the total number of good packets that were received by a broadcast address. |
|
|
|
|
|
Show/Hide |
| Check whether or not to display Multicast, Broadcast, and Unicast Packets. |
|
|
|
|
|
Clear |
| Clicking this button clears all statistics counters on this window. |
|
|
|
|
|
View Table |
| Clicking this button instructs the Switch to display a table rather than a line graph. |
|
|
|
|
|
View Line Chart |
| Clicking this button instructs the Switch to display a line graph rather than a table. |
|
|
|
|
|
120
