DGS-3024 Gigabit Ethernet Switch Manual
| Figure 7- 10. IGMP Snooping Settings window | |
The following parameters may be viewed or modified: | ||
|
|
|
Parameter | Description | |
|
|
|
VLAN ID | This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user |
|
| wishes to modify the IGMP Snooping Settings for. |
|
|
|
|
VLAN Name | This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user |
|
| wishes to modify the IGMP Snooping Settings for. |
|
|
|
|
Query Interval | Allows the entry of a value between 1 and 65535 seconds, with a default of 125 |
|
| seconds. This specifies the length of time between sending IGMP queries. |
|
|
|
|
Max Response Time | Sets the maximum amount of time allowed before sending an IGMP response report. |
|
| A value between 1 and 25 seconds can be entered, with a default of 10 seconds. |
|
|
|
|
Robustness Value | A tuning variable to allow for subnetworks that are expected to lose a large number of |
|
| packets. A value between 2 and 255 can be entered, with larger values being specified |
|
| for subnetworks that are expected to lose larger numbers of packets. The default is 2 |
|
| seconds. |
|
|
|
|
Last Member Query | Specifies the maximum amount of time between |
|
Interval | including those sent in response to leave group messages. A value between 1 and 25. |
|
| The default is 1 second. |
|
|
|
|
Host Timeout | This is the maximum amount of time in seconds allowed for a host to continue |
|
| membership in a multicast group without the Switch receiving a host membership |
|
| report. The default is 260. |
|
|
|
|
Route Timeout | This is the maximum amount of time in seconds a route is kept in the forwarding table |
|
| without receiving a membership report The default is 260 |
|
32
