D-Link DSL-G604T Parameter Description Status, RSA with RC4, RSA with 3DES EDE, DHS DSS with 3DES

DGS-3024 Gigabit Ethernet Switch Manual

SSL function, which are all enabled by default. To utilize a particular ciphersuite, disable the unwanted ciphersuites, leaving the desired one for authentication.

When the SSL function has been enabled, the web will become disabled. To manage the Switch through the web-based management while utilizing the SSL function, the web browser must support SSL encryption and the header of the URL must begin with https://. (Ex. https://10.90.90.90) Any other method will result in an error and no access can be authorized for the web-based management.

To view the following window, click Security > Secure Socket Layer (SSL) > Configuration:

	Figure 8- 3. SSL Configuration window
To set up the SSL function on the Switch, configure the following parameters and click Apply.
Parameter	Description
Status	Use the pull-down menu to enable or disable the SSL status on the Switch. The default
	is Disabled.
RSA with RC4 128	This ciphersuite combines the RSA key exchange, stream cipher RC4 encryption with
MD5	128-bit keys and the MD5 Hash Algorithm. Use the pull-down menu to enable or
	disable this ciphersuite. This field is Enabled by default.
RSA with 3DES EDE	This ciphersuite combines the RSA key exchange, CBC Block Cipher 3DES_EDE
CBC SHA	encryption and the SHA Hash Algorithm. Use the pull-down menu to enable or disable
	this ciphersuite. This field is Enabled by default.
DHS DSS with 3DES	This ciphersuite combines the DSA Diffie Hellman key exchange, CBC Block Cipher
EDE CBC SHA	3DES_EDE encryption and SHA Hash Algorithm. Use the pull-down menu to enable or
	disable this ciphersuite. This field is Enabled by default.
RSA EXPORT with	This ciphersuite combines the RSA Export key exchange and stream cipher RC4
RC4 40 MD5	encryption with 40-bit keys. Use the pull-down menu to enable or disable this
	ciphersuite. This field is Enabled by default.

NOTE: Certain implementations concerning the function and configuration of SSL are not available on the web-based management of this Switch and need to be configured using the command line interface. For more information on SSL and its functions, see the DGS-3024 Command Line Interface Reference Manual, located on the documentation CD of this product.

88