D-Link DSL-G604T manual Snmp Engine ID, Parameter Description Host IP Address, Snmp Version

DGS-3024 Gigabit Ethernet Switch Manual

Figure 9- 12. SNMP Host Table window

To add a new entry to the Switch's SNMP Host Table, click the Add button in the upper left-hand corner of the window. This will open the SNMP Host Table Configuration window, as shown below.

		Figure 9- 13. SNMP Host Table Configuration window
The following parameters can be set:
Parameter	Description
Host IP Address		Type the IP address of the remote management station that will serve as the SNMP
		host for the Switch.
SNMP Version		V1 - To specifies that SNMP version 1 will be used.
		V2 - To specify that SNMP version 2 will be used.
		V3-NoAuth-NoPriv- To specify that the SNMP version 3 will be used, with a NoAuth-
		NoPriv security level.
		V3-Auth-NoPriv- To specify that the SNMP version 3 will be used, with a Auth-
		NoPriv security level.
		V3-Auth-Priv- To specify that the SNMP version 3 will be used, with a Auth-Priv
		security level.
Community String	or	Type in the community string or SNMP V3 user name as appropriate.
SNMP V3 User Name

To implement your new settings, click Apply. To return to the SNMP Host Table, click the Show All SNMP Host Table Entries link.

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the SNMP engine on the Switch.

114