DGS-3024 Gigabit Ethernet Switch Manual
To delete an existing SNMP Group Table entry, click the corresponding 
under the Delete heading.
To display the current settings for an existing SNMP Group Table entry, click the hyperlink for the entry under the Group Name.
Figure 9- 9. SNMP Group Table Display window
To add a new entry to the Switch's SNMP Group Table, click the Add button in the upper
Figure 9- 10. SNMP Group Table Configuration window
The following parameters can be set:
Parameter | Description | ||
|
|
|
|
Group Name |
| Type an alphanumeric string of up to 32 characters. This is used to identify the new |
|
|
| SNMP group of SNMP users. |
|
|
|
|
|
Read View Name |
| This name is used to specify the SNMP group created can request SNMP mes- |
|
|
| sages. |
|
|
|
|
|
Write View Name |
| Specify a SNMP group name for users that are allowed SNMP write privileges to the |
|
|
| Switch's SNMP agent. |
|
|
|
|
|
Notify View Name |
| Specify a SNMP group name for users that can receive SNMP trap messages |
|
|
| generated by the Switch's SNMP agent. |
|
|
|
|
|
111
