104 Expansion Cards
4
If you are installing a card in an empty card connector on the system board, remove the filler bracket to
create a card-slot opening at the back of the computer. Then continue with step6.
5
If you are installing a card to replace one already installed in the computer, remove the installed card
(see "Removing a PCI Card" on page109).
6
Prepare the card for installation.
NOTE: See the documentation that came with the card for information on configuring the card, making
internal connections, or customizing it for your computer.
1card 4card insert
2card-retention latch 5release tab
3system board
connector
5
2
3
1
4