Installing a PCI Express x16 Card or DVI Card

1Follow the procedures in "Before You Begin" on page 21.

2Remove the computer cover (see "Removing the Computer Cover" on page 168).

NOTE: For PCI card locations, see "System Board Components" on page 172.

3Gently lift the release tab on the card retention latch from the inside and pivot the latch open.

4If you are installing a new PCI Express x16 card or DVI card, remove the filler bracket to create a card- slot opening. Then continue with step 5.

5If you are replacing a PCI Express x16 card or DVI card, remove the card (see "Removing a PCI Express x16 Card or DVI Card" on page 189). If necessary, disconnect any cables connected to the card. Then continue with step 6.

6Prepare the card for installation.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

NOTE: See the documentation that came with the card for information on configuring the card, making internal connections, or customizing it for your computer.

7Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

1

2

1 PCI Express x16 card

2

PCI Express x16 card

 

 

connector

186

Expansion Cards

Page 186
Image 186
Dell 755 manual 186