12If you removed a sound card:

a Enter system setup, select Audio Controller, and change the setting to On (see "Entering System Setup" on page 280).

b Connect external audio devices to the audio connectors on the computer back panel.

13If you removed a network adapter card:

a Enter system setup, select Network Controller, and change the setting to On (see "Entering System Setup" on page 280).

b Connect the network cable to the integrated network connector on the back panel of the computer.

PS/2 Serial Port Adapter

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

Installing a PS/2 Serial Port Adapter

1Follow the procedures in "Before You Begin" on page 21.

2Remove the computer cover (see "Removing the Computer Cover" on page 90).

3Gently lift the release tab on the card retention latch from the inside to pivot the latch open. Pivot the latch until it snaps into the open position.

4Remove the filler bracket (if applicable).

NOTE: See the documentation that came with the adapter for information on configuring the adapter, making internal connections, or customizing it for your computer.

116

Expansion Cards

Page 116
Image 116
Dell 755 manual PS/2 Serial Port Adapter