If you are replacing a card, uninstall the driver for the existing card. See the documentation that came with the card for instructions.

1Follow the procedures in "Before You Begin" on page 21.

2Remove the computer cover (see "Removing the Computer Cover" on page 27).

3Gently push the release tab on the card retention latch from the inside to pivot the latch open. The latch will remain in the open position.

2

1

3

 

 

4

 

5

6

1

card retention latch

2

alignment guide

3

card

4

card-edge connector

5

card connector

6

release tab

4If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with step 5.

5If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any cables connected to the card.

6If your card includes a card retention bar, remove the bar. Gently pull the securing tab, grasp the card by its top corners, and ease it out of its connector.

7Prepare the new card for installation.

NOTE: See the documentation that came with the card for information on configuring the card, making internal connections, or customizing it for your computer

42

Cards

Page 42
Image 42
Dell 755 manual Cards