NOTICE: Do not place any heavy objects on top of the computer. Doing so may bend the chassis and cause difficulty in removing a module device.

4Pull the device by the latch release to remove the device from the module bay.

1

1latch release

5Slide the new device into the module bay.

6If desired, you may lock the new device in the module bay by moving the module locking switch to the locked position (you must remove the computer cover to use the locking switch).

7If you removed the cover to lock the device in the module bay, replace the computer cover (see "Replacing the Computer Cover" on page 317).

Removing and Installing a Device When Your Computer Is Running Microsoft® Windows®

1To remove a device installed in the module bay, double-click the Safely Remove Hardware icon on the taskbar.

2In the list of devices that appears on your screen, click the device you want to eject.

NOTE: You cannot remove a device if your computer is turned on and the device is locked in the module bay. You must shut down the computer and follow the steps in "Installing a Device When Your Computer Is Turned Off" on page 255 to remove a locked device.

NOTICE: Do not place any heavy objects on top of the computer. Doing so may bend the chassis and cause difficulty in removing a module device.

3When a computer message indicates that you can remove the device, remove the device from the module bay.

4Slide the new device into the module bay.

258

Module Bay

Page 258
Image 258
Dell 755 manual Latch release