7While pressing the lever, pull the removal pull tab up and remove the card out of the card connector.

1

5

4

 

 

 

7

6

 

1

PCI Express x16 DVI-card

2

removal pull tab

3

DVI card connector

4

lever

5

securing slot

6

securing tab

7PCI Express x16 card connector

8If you are removing the card permanently, install a filler bracket in the empty card-slot opening.

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets keep dust and dirt out of your computer and maintain the airflow that cools your computer.

9Before you close the card retention mechanism, ensure that:

The tops of all cards and filler brackets are flush with the alignment bar.

The notch in the top of the card or filler bracket fits around the alignment guide.

10Secure any remaining card(s) by closing the card retention latch and snapping it into place.

NOTICE: Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

11Replace the computer cover (see "Replacing the Computer Cover" on page 317).

12Uninstall the card’s driver. See the documentation that came with the card for instructions.

190

Expansion Cards

Page 190
Image 190
Dell 755 manual Expansion Cards