192 Expansion Cards
8
Connect the adapter cable to the PS/2 serial port adapter connector (PS2/SERIAL2) on the system
board (see "System Board Components" on page172).
NOTE: See the documentation for the PS/2 serial port adapter for information about the cable connections.
9
Replace the computer cover (see "Replacing the Computer Cover" on page317.
Removing a PS/2 Serial Port Adapter
1
Follow the procedures in "Before You Begin" on page 21.
2
Remove the computer cover (see "Removing the Computer Cover" on page168).
3
Gently lift the release tab on the card retention latch from the inside to pivot the latch open. Pivot the
latch until it snaps into the open position.
4
Disconnect the PS/2 serial-port cable from the system board (see "System Board Components" on
page172).
1 release tab 2adapter retention latch 3serial port adapter bracket
4serial port adapter connector 5serial port adapter system
board connector
(PS2/SERIAL2)
2
4
5
3
1