I/O Panel

Removing the I/O Panel

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel.

1Follow the procedures in "Before You Begin" on page 21.

2Remove the computer cover (see "Removing the Computer Cover" on page 27).

NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness may result in damage to the cable connectors and the cable routing clips.

3Remove the screw that secures the I/O panel. Press the release button to slide the card away from the front of the computer.

4Disconnect all of the cables from the I/O panel, and remove the panel from the computer.

I/O Panel

77

Page 77
Image 77
Dell 755 manual Removing the I/O Panel