Drives

Your computer supports:

Two SATA (Serial ATA) hard drives

One 3.5-inch floppy drive or media card reader

Two SATA optical drives

One eSATA drive (with optional bracket)

2

1

3

1 optical drive

2 3.5-inch drive or media card

3 hard drive

 

reader

 

General Drive Installation Guidelines

SATA connectors on the system board are labeled SATA0, SATA1, SATA2, and SATA3.

Hard drives must be connected to the lower numbered SATA connectors, while any other SATA devices (like an optical drive) must be connected to the remaining SATA connectors numbered higher than the one that the hard drive(s) is connected to. For example, if you have two SATA hard drives and one SATA optical drive, connect the two hard drives to the SATA0 and SATA1 connectors, and connect the SATA optical drive to the SATA2 connector. (See "System Board Components" on page 32 for the location of SATA connectors on the system board.)

Drives

53

Page 53
Image 53
Dell 755 manual Drives, General Drive Installation Guidelines