bConnect the network cable to the connector on the network adapter card. Do not connect the network cable to the integrated network connector on the back panel of the computer.

14Install any drivers required for the card as described in the card documentation.

Removing a PCI Card

1Follow the procedures in "Before You Begin" on page 21.

2Remove the computer cover (see "Removing the Computer Cover" on page 90).

3Gently rotate upward the release tab on the card-retention latch.

1

5

2

3 4

1

card

4

card insert

2

card-retention latch

5

release tab

3system board connector

4If necessary, disconnect any cables connected to the card.

5If you are replacing a PCI Express x16 card, remove the installed card by gently pulling the release lever away from the card until you release the securing tab from the dent in the card.

Expansion Cards

109

Page 109
Image 109
Dell 755 manual 109