12If you removed a network adapter card:

a Enter system setup, select Network Controller, and change the setting to On (see "Entering System Setup" on page 280).

b Connect the network cable to the integrated network connector on the back panel of the computer.

Installing a PCI Card in the Riser-Card Cage

1Follow the procedures in "Before You Begin" on page 21.

2Remove the computer cover (see "Removing the Computer Cover" on page 90).

3If applicable, remove the card installed in the PCI3 connector on the system board.

4Remove the riser-card cage:

a Check any cables connected to cards through the back panel openings. Disconnect any cables that will not reach the riser-card cage once they are removed from the computer.

b Gently pull on the handle and lift the riser-card cage up and away from the computer.

1

2

1riser-card cage

2handle

Expansion Cards

111

Page 111
Image 111
Dell 755 manual 111