Cable Cover (Optional)

Attaching the Cable Cover

1Ensure that all external device cables are threaded through the hole in the cable cover.

2Connect all device cables to the connectors on the back of the computer.

3Hold the bottom of the cable cover so as to align the tabs with the slots on the computer’s back panel.

4Insert the tabs into the slots and slide the cover to align the ends of the cover with the ends of the chassis (see the illustration) until the cable cover is securely positioned.

5Install a security device in the security cable slot (optional).

1

2

1cable cover

2security cable slot

Removing the Cable Cover

1If a security device is installed in the security cable slot, remove the device.

Ultra Small Form Factor Computer

237

Page 237
Image 237
Dell 755 manual Cable Cover Optional, 237