1

2

3

4 5

1

release tab

2

card retention latch

3

card

4

card-edge connector

5

card connector

 

 

4If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with step 6.

5If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any cables connected to the card. Then continue with step 6.

6Prepare the card for installation.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

NOTE: See the documentation that came with the card for information on configuring the card, making internal connections, or customizing it for your computer.

7Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

182

Expansion Cards

Page 182
Image 182
Dell 755 manual Expansion Cards