13If you installed a network adapter card and want to turn off the integrated network adapter:

a Enter system setup, select Integrated NIC from the Onboard Devices group, and change the setting to Off (see "System Setup" on page 280).

b Connect the network cable to the network adapter card’s connectors. Do not connect the network cable to the integrated network connector on the back panel of the computer.

NOTICE: If you disable the integrated network adapter, you will not have AMT functionality.

14Install any drivers required for the card as described in the card documentation.

Removing a PCI Card

1Follow the procedures in "Before You Begin" on page 21.

2Remove the computer cover (see "Removing the Computer Cover" on page 168).

NOTE: For PCI card locations, see "System Board Components" on page 172.

3Gently lift the release tab on the card retention latch from the inside and pivot the latch open.

4If necessary, disconnect any cables connected to the card.

5Grasp the card by its top corners, and ease it out of its connector.

1

2

3

4 5

1

release tab

2

card retention latch

3

PCI card

4

card-edge connector

5

card connector

 

 

184

Expansion Cards

Page 184
Image 184
Dell 755 manual 184