MP2000 AIR CONDITIONERS

Sistema di controllo a microprocessore per condizionatori d'aria • Air conditioners microprocessor control system

FUNZIONE CHANGE OVER

Questa funzione è inserita nel programma di gestione della rete LAN ed è disponibile solo con il programma per condizionatori standard (Eprom CZX...)

La logica di funzionamento della funzione "Change over" consente di mantenere equalizzate le ore di funzionamen- to di tutte le unità connesse e permette di attivare l'unità posta in stand-by in seguito ad una anomalia o al soprag- giungere di un allarme di una o più unità presenti nella rete.

La funzione CHANGE OVER non prevede l'installazio- ne della scheda "ADDR+CK" in quanto il conteggio del tempo viene effettuato dall'orologio interno del micro- processore.

La logica prevede il seguente stato di funzionamento:

-unità "Master" (principale): è l'unità di riferimento che determina lo stato di funzionamento delle altre unità ed è identificabile dalla lettera "M" presente sul display. Lo stato di unità "Master" viene definito automaticamente dal programma partendo dall'unità 1 della rete LAN.

Se la sonda di temperatura dell'unità "Master" misura un valore superiore al setpoint impostato, viene disabilitata la funzione di riscaldamento anche per le unità "Slave". Se la sonda di temperatura dell'unità "Master" misura un valore inferiore al setpoint impostato, viene disabilitata la funzione di raffreddamento anche per le unità "Slave".

-unità in stand-by:è l'unità di riserva pronta all'avvia- mento nel caso di anomalia o allarme delle altre unità. Lo stato di unità stand-by viene definito automaticamente dal programma.

-unità "Slave" (secondaria): è l'unità in funzione (max 2) il cui stato viene definito automaticamente dal program- ma.

E' importante chiarire che le unità "Slave" utilizzano la propria regolazione per il controllo della temperatura attivando autonomamente i relativi componenti (com- pressore o resistenze).

IMPOSTAZIONE DEI PARAMETRI

Dopo aver effettuato la configurazione LAN è necessario definire quali unità si desidera inserire nella rotazione.

Su ogni unità procedere come segue:

Premere il tasto PRG, inserire la password e comparirà la maschera relativa ai "Program Sets".

Scorrere i parametri con i tasti FRECCIA fino a raggiungere il set "Change over______".

Premere ENTER per impostare il valore su "present" con il tasto FRECCIA (Change over present).

Premere ENTER per confermare il dato.

Non impostare questo parametro per escludere l'unità dalla funzione Change Over. L'unità funzionerà in modo autonomo, mantenendo le caratteristiche della rete LAN.

Quindi dall'unità 1 o Master procedere come segue: Premere il tasto FRECCIA per passare al secondo para- metro "Change over time".

Con questo parametro si definisce ogni quante ore di funzio- namento effettivo deve avvenire la rotazione delle unità. Premere ENTER ed impostare le ore desiderate con il tasto

FRECCIA.

Premere ENTER per confermare il dato.

Premere il tasto FRECCIA per passare al terzo parametro

"Change over Restart".

50

CHANGE OVER FUNCTION

This function is included in the LAN network manage- ment program and it is available with the program for standard air conditioners only (Eprom CZX……).

The working logic of the "Change over" function allows to keep equalized the working hours of all connected units and makes possible the activation of the unit put in stand- by due to an anomaly or to an alarm intervention from one or more units present in the network.

The CHANGE OVER function don't needs the "ADDR+CK" board installation because the time count is made by the internal microprocessor clock.

The logic foresees the following working status:

-"Master" unit (main unit): this is the reference unit, fixing the working status of the other units and it can be identified by letter "M" displayed. The "Master" unit status is automatically set by the program, starting from unit 1 of the LAN network.

If the value measured by the temperature sensor of the "Master" unit is higher than the set parameter (setpoint), the heating function will be disabled also on the "Slave" units.

If the value measured by the temperature sensor of the "Master" unit is lower than the set parameter (setpoint), the cooling function will be disabled also on the "Slave" units.

-Stand-by unit: this is the unit ready to start in case any anomaly or alarm occur from the other units.

The Stand by unit status is automatically set by the program.

-"Slave unit" (second level unit): this is the unit in operation (max. 2), which status is automatically fixed by the program. It is important to clarify that the "Slave units" make use of their own control for the temperature regu- lation, automatically activating the relative components (compressors or heating elements).

PARAMETERS SETTING

After the correct LAN configuration, it is necessary to define which units have to be inserted in the rotation.

On each unit, proceed as follows:

Press PRG key, enter the password and the mask relative to the "Program Sets" will be displayed.

Run the parameters by ARROW keys until the set "Change over ______" will appear.

Press ENTER and set the value on "present" by ARROW key (Change over present).

Press ENTER to confirm the data.

Do not set this parameter to exclude the unit from the Change Over function. The unit will work in stand-alone mode, maintaning the LAN network characteristics.

Than, from unit 1 or Master proceed as follows: Press ARROW key to get to the second parameter "Change over time".

With this parameter, it is possible to select every how many effective working hours the units rotation must take place. Press ENTER and set the requested hours by ARROW key.

Press ENTER to confirm the data.

Press ARROW key to get to the third parameter "Change over Restart".

RC GROUP - 149_ItEn.0102

Page 50
Image 50
Dell MP2000 manual Funzione Change Over, Impostazione DEI Parametri, Change Over Function, Parameters Setting

MP2000 specifications

The Dell MP2000 is a versatile multimedia projector designed to deliver impressive performance for both business and entertainment purposes. This projector offers a sleek design and robust features, making it an ideal choice for presentations, classroom environments, and home theater setups.

One of the standout features of the Dell MP2000 is its high brightness capability. With a brightness rating of about 3,000 ANSI lumens, it ensures clear and vivid projections even in well-lit environments. This brightness level makes it suitable for various settings, from large conference rooms to small classrooms, ensuring that the content is easily visible to all audiences.

In addition to its brightness, the MP2000 boasts a native resolution of XGA (1024x768 pixels), providing sharp and detailed images. The projector supports a range of resolutions up to UXGA (1600x1200), ensuring compatibility with various media formats. This versatility allows users to project high-quality videos, presentations, and images with excellent clarity.

The MP2000 employs DLP (Digital Light Processing) technology, which enhances image quality and color accuracy. DLP is known for its superior brightness and contrast characteristics, giving presentations a professional look. The projector’s color wheel ensures vibrant colors, making it perfect for showcasing graphics and videos.

Connectivity options on the Dell MP2000 are extensive, catering to various devices and media sources. It includes multiple input ports, such as VGA, HDMI, and USB, allowing easy connection to laptops, desktops, and other devices. The inclusion of an RS-232 port also enables integration into larger AV systems for more streamlined control.

Portability is another key characteristic of the MP2000. Weighing less than 5 pounds, it is easy to transport, making it a great option for traveling professionals or educators who need to move between locations. The projector also features an intuitive interface and remote control, facilitating user-friendly navigation through menus and settings.

For added convenience, the MP2000 supports rapid startup and shutdown processes, reducing waiting times between presentations. Its lamp life is impressive, lasting up to 5,000 hours in eco mode, which minimizes maintenance costs and ensures longevity.

In conclusion, the Dell MP2000 is a powerful and reliable projector that excels in brightness, image quality, and connectivity. Its DLP technology, portability, and user-friendly features make it a top choice for anyone looking to enhance their presentation or home viewing experience. Whether for educational purposes or business meetings, the MP2000 delivers outstanding performance and versatility.