Front-panel features and indicators

Figure 1. Front-panel features and indicators (3.5 inch hard-drive chassis)—PowerEdge R730

Item

Indicator, button, or

Icon

Description

 

connector

 

 

 

 

 

 

1

Power-on indicator,

 

The power-on indicator lights when the system

 

power button

 

power is on. The power button controls the power

 

 

 

supply output to the system.

 

 

 

NOTE: On ACPI-compliant operating systems,

 

 

 

turning off the system using the power button

 

 

 

causes the system to perform a graceful

 

 

 

shutdown before power to the system is

 

 

 

turned off.

2

NMI button

 

Used to troubleshoot software and device driver

 

 

 

errors when running certain operating systems. This

 

 

 

button can be pressed using the end of a paper clip.

 

 

 

Use this button only if directed to do so by qualified

 

 

 

support personnel or by the operating system

 

 

 

documentation.

3

System identification

 

The identification buttons on the front and back

 

button

 

panels can be used to locate a particular system

 

 

 

within a rack. When one of these buttons is pressed,

 

 

 

the LCD panel on the front and the system status

 

 

 

indicator on the back flashes until one of the

 

 

 

buttons is pressed again.

 

 

 

Press to toggle the system ID on and off.

If the system stops responding during POST, press and hold the system ID button for more than five seconds to enter BIOS progress mode.

10

Page 10
Image 10
Dell R730xd owner manual Front-panel features and indicators