Expansion Bus

 

NOTE: To use slots 1 through 4, both the

 

processors must be installed.

 

(Slot 5) One full-height, full-length x8 link

Riser 3 (default)

(Slot 6) One full-height, full-length x8 link

 

(Slot 7) One full-height, full-length x8 link

Riser 3 (alternate for GPU)

(Slot 6) One full-height, full-length x16 link

 

 

Memory

 

 

 

Architecture

1333 MT/s, 1600 MT/s, 1866 MT/s or 2133 MT/s

 

DDR4 registered, load-reduced Error Correcting

 

Code (ECC) DIMMs

 

Support for advanced ECC or memory optimized

 

operation

Memory module sockets

Twenty-four 288-pin

Memory module capacities

 

LRDIMMs

32 GB quad-ranked

RDIMMs

4 GB single-ranked, 8 GB or 16 GB dual-ranked

Minimum RAM

4 GB with a single processor

 

8 GB with a dual processor (minimum one

 

memory module per processor)

Maximum RAM

Up to 768 GB with a dual processor

 

Up to 384 GB with a single processor

 

 

Drives

 

 

 

Hard drives

 

(PowerEdge R730)

 

Eight–hard-drive systems

Up to eight 3.5 inch or 2.5 inch, internal, hot-swappable

 

SAS, SATA, or Nearline SAS hard drives in hard-drive slots 0

 

through 7.

Sixteen–hard-drive systems

Up to sixteen 2.5 inch, internal, hot-swappable SAS, SATA,

 

SAS/SATA SSD, or Nearline SAS hard drives in hard-drive

 

slots 0 through 15.

Hard drives

 

(PowerEdge R730xd)

 

Twelve plus two–hard-drive systems

Up to twelve 3.5 inch and two optional 2.5 inch back-

 

accessible, internal, hot-swappable SAS, SATA, SAS/SATA

201

Page 201
Image 201
Dell R730xd owner manual