CAUTION: Do not remove an installed Trusted Platform Module (TPM). Any attempt to remove an installed TPM from the system board may damage the TPM.

Steps

1.Align the edge connectors on the TPM with the slot on the TPM connector.

2.Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the system board.

3.Press the plastic bolt until the bolt snaps into place.

Figure 62. Installing the TPM

 

 

1.

TPM

2.

TPM connector

3.

slot on the TPM connector

4.

plastic bolt

5.slot on the system board

Re-enabling the TPM for BitLocker users

Initialize the TPM.

For more information on initializing the TPM, see http://technet.microsoft.com/en-us/library/ cc753140.aspx.

The TPM Status changes to Enabled, Activated.

Re-enabling the TPM for TXT users

1.While booting your system, press <F2> to enter System Setup.

2.In the System Setup Main Menu, click System BIOS System Security Settings.

3.In the TPM Security option, select On with Pre-boot Measurements.

4.In the TPM Command option, select Activate.

134

Page 134
Image 134
Dell R730xd owner manual Re-enabling the TPM for BitLocker users, Re-enabling the TPM for TXT users